ETAS ES584.1, Руководство пользователя

Страница: 32 / 56

ES584.1 – User’s Guide 32
ETAS Troubleshooting Problems
The ES584.1 module is
not detected when exe-
cuting the "Scan for
hardware" function. Did you install the
required version of INCA? Check whether the INCA
version installed on your
PC meets the require-
ments in chapter 6.7.2
on page 39.
Did you install the
required version of INCA
ODX add-on? Check whether the INCA
ODX add-on version
installed on your PC meets
the requirements in chap-
ter 6.7.2 on page 39.
Did you install the
required firmware on the
module? Check with HSP whether
the required firmware is
installed on the module.
Is the hardware connected
to the PC? Check whether the
cabling is intact.
The measurements are
not being started. Does the INCA monitor
log ask you to perform an
update? Update the firmware of
the module with HSP.
Does the module provide
no data? Check whether your mea-
suring setup meets the
requirements.
Check whether the
cabling of the hardware to
the PC is correct and
intact.
Check whether the "
ER
"
LED is flashing: In certain
circumstances, the baud
rate may not be supported
by the module. You can
find information on the
supported baud rates in
chapter 6.8.2 on page 40.
Problem Diagnostics questions Possible solution