background image

3

Etac / Prio / www.etac.com

Product description:

Etac Prio (hereafter called Prio) is a manual wheelchair with a seat 

and back support with ergonomic features. The seat and back 

support with ergonomic features are available with both manual or 

electrical operation. Prio offers great opportunities for customisations 

via settings and configurable parts. Prio is designed for indoor and 

outdoor use. Prio has fixing points for motor vehicle transport. Prio is 

intended for reuse.

Intended use:

Prio is designed to be adapted to cater to the user’s individual abilities 

and needs. The back support and seat’s ergonomic features provide 

a relaxing and comfortable resting position, as well as support during 

active sitting.
Prescriptions should be undertaken by a responsible clinician. The 

wheelchair should be adapted and adjusted by a trained healthcare 

professional.

Intended user:

Prio is designed for users with physical disabilities who require a 

variety of seated positions. Prio can be used without an assistant 

if the user can independently understand its features, as well as 

self-propel and brake without assistance. Prio is designed for hand 

and/or foot propulsion. The wheelchair is designed based on users 

of adult size with a body height from 140 cm. The wheelchair is 

also suitable for amputees. The wheelchair is not usually suitable 

for small children. Maximum permissible user weight, dimensions 

and weights are stated in the technical data. The wheelchair’s field 

of application is not restricted to a specific diagnosis. There are no 

known contraindications.

CE marking, tests:

The product conforms to the requirements of the Medical Devices 

Regulation (EU) 2017/745.
The product has been tested and meets the requirements of EN 

12183, which includes fire testing in accordance with ISO 8191-2.

Combination agreement is available, see 

www.etac.com

.

The product is crash tested at RISE, Research Institutes of Sweden, 

according to ISO 7176-19. The tests have been carried out with clamping 

device UNWIN_WWR/ATF/K/R and with three point strap 907523, Klip-

pan Safety AB.
The tested product was equipped with:

The parking brakes activated

Anti-tip guards activated

Head support mounted

Handrims on the rear wheels (not 16" wheel)

Service life:

The expected duration and service life of the main product is at least 

five years when used in accordance with its intended use, safety 

instructions, reconditioning manual and maintenance instructions in 

the manual. The main product is covered by seat and back chassis. 

Remaining parts/accessories are handled in accordance with the 

manual and reconditioning manual. The actual service life may vary 

depending on how much and intensively the product is used, but is a 

maximum of 10 years. If the product is intended to be used after the 

service life specified by Etac, it is incumbent on the product owner 

to ensure the product’s performance in accordance with the manual 

and reconditioning instructions. If this cannot be ensured, the product 

must be taken out of service.

The following surface treatment methods have been used:

Varnished surfaces = Powder-applied polyester or ED varnish
Unvarnished aluminium parts = Anodizing
Unvarnished steel surfaces = Galvanized

Warranty:

5 year warranty against defects in material and manufacture. For 

conditions, see 

www.etac.com

.

Customization:

is everything that goes beyond the manual’s instructions and settings. 

Wheelchair specially adapted by the customer must not retain Etac’s 

CE marking. Etac’s warranty expires. If there is any uncertainty 

regarding the execution of the customization, consult Etac.
Wheelchairs coupled with another product may not retain either 

product’s CE mark unless combination agreements exist. Contact Etac 

for current information.

Reutilization:

Etac Prio can be reused. Follow the instructions in “Reconditioning 

instructions, Etac manual wheelchairs” at 

www.etac.com

.

Tools:

1. General

2. Safety

General warnings

The following must be taken into consideration during use.

Bright sunlight could heat parts of the chair and cause burns.

After adjusting the seat height, centre of balance or back sup-

port angle, always ensure that you check the function of the 

anti-tips.

Warning: This product can be adjusted beyond safe use. 

The prescription of the product must be done by medical per-

sonnel and tested by a specialist.

The chair might tip if the incline at the rear is greater than 6°.  

Use anti-tips!

In case of an adverse event occurred in relation to use of the device, 

it should be reported to your local dealer and the national competent 

authority in a timely manner. The local dealer will forward information 

to the manufacturer.

Symbols and warnings

These symbols occur on labels and in the user manual.

Securing. Fixing points for 

the clamping system for 

transport in motor vehicles.

Risk of tipping: Always keep 

the anti-tips folded down.

Do not lift the chair by 

removable parts

Allen key

3, 4, 5, 6 mm

Ring spanner

8, 10, 13, 17, 24 mm

Socket spanner

19 mm

Содержание Prio 13420305













































Отзывы: