Etac Prio 13420305, Руководство пользователя

Страница: 16 / 44

16
Etac / Prio / www.etac.com
“Click”
30-70 mm
Rear wheel with quick release hub
Push the button on the quick-release hub and mount the wheel. The
distance between the hub sleeve and the locking balls can be adjusted
by adjusting the nut on the outside of the hub. The distance between
the hub sleeve and the locking balls should be 0.2 to 1.2 mm.
During installation, check that the rear wheel is securely mounted.
The button in the hub should pop out to the original position. Test
by pulling the wheel.
Anti-tips
• The anti-tips can be folded and are height-settable.
• When unfolding the anti-tip guard, make sure that the
locking pin snaps in properly.
• After all adjustments to the chair, the function of the anti-
tip guard must be checked. If the anti-tip guard needs to
be adjusted, contact your technical aids centre.
Bear in mind the risk of tipping.
Always check the positioning of the anti-tips.
Leg support, elevating
The leg support can be lifted/swung to the side as needed. The
footplates can be folded and the calf support can
be swung to the side.
Leg support angle
The leg support angle is adjustable in fixed positions. Set
the angle by pressing down the button and lifting/lowering.
Don’t lift the chair by the leg supports.
10. How to use
Tilter
is integrated in the frame