33
Etac / Prio / www.etac.com
5 mm
13 mm
5
6
7
14. Advanced settings, adjustments
5. Remove the rear wheels (not 16”). Remove one arm support and
lock the back support angle using a screw driver, an Allen key or
similar (later adjust the back support angle to align correctly with
the hole).
6. Lie the chair down on its "back". Loosen the screw next to the gas
piston's front attachment.
7. Loosen the screws on the side plates by approx. 1-2 turns. Loosen
and remove the screws which hold the side plates in place. Support
the back chassis while the screws are loosened. This will prevent
the gas piston being damaged. Reposition to the required seat
depth, insert and tighten the screws (see illustrations in section
”Screw positions for rear seat depth”
Bear in mind the risk of tipping.
Always check the positioning of the anti-tips.
Содержание Prio 13420305
Страница 43: ...43 Etac Prio www etac com...