12
Etac / Prio / www.etac.com
7 Nm
5 mm
Push handle/Bow handle
Install the push handles/bow handle by loosening the handle and
pushing in the locking pins on the push handle. Note! push handle
with
symbol for back angle
must be installed on the
left
side, push
handle with symbol for tilt must be installed on the
right
side.
Fasten the handle.
Make sure knobs are securely tightened. This is especially
important when lifting the wheelchair with the user in.
Ensure that the push handle locking pins are secured in the
push handle attachment.
Back angle
Tilt
Cross brace
If the chair is equipped with a push brace, it can sometimes be
delivered with the cross brace removed. Fit the cross brace as shown
in the illustrations.
8. Installation upon delivery
Head support
Never lift the chair by the head support.
Содержание Prio 13420305
Страница 43: ...43 Etac Prio www etac com...