21
Etac / Prio / www.etac.com
5 mm
3 mm
Changing the depth of the foot supports
Adjust the depth of the foot supports by
switching the right and left foot support.
Do not forget to adjust the angle.
Arm support (adjustment)
• Loosen the screw for height adjustment (see also section "Settings,
readjustments").
• Move the arm support up or down to the desired height and tighten
the screws.
• Loosen the screws on the underside of the arm support cushion to
adjust the length of the cushion.
• Correctly adjusted arm supports provide upper body support. The
arm support plate should be approximately 5 mm taller than the
elbow when bent at an angle of 90°.
Calf/heel strap
• Adjust the length so that the centre of the feet are placed on the
footplates.
Footplates
Adjust the height to support the feet and so that
the thighs rest against the seat cushion.
For outdoor use the footplates should be raised
4 – 6 cm above the ground.
Tipping risk!
Never stand on the footplates
Angle adjustment
Adjust the angle of the foot supports so that your ankles
are at a 90° angle.
Adjusting the height
Fully loosen the locking handle on the leg support. Remove the screw.
Set the height. Replace the screw and handle. Tighten securely.
11. Seating comfort settings
Содержание Prio 13420305
Страница 43: ...43 Etac Prio www etac com...