GB
OPERATING INSTRUCTIONS
PD-C360i/24 KNX UP
(EP10427428)
PD-C360i/24 KNX ECO UP (EP10427435)
www.esylux.com 6/13
5. LEDS IN SENSOR
Options: choose between one of the LED brightness levels or “OFF”
If the LED is not switched off, you can specify its colour when motion is detected
(2 x flashes) and when motion detection is locked via object 32. You can
use the parameters to set the brightness of the LED to 1 of 5 different levels.
5.1 Night-light feature
This function allows you to use the LED as a nightlight. It will switch to one of the
preset colours as soon as the light value falls below or exceeds the threshold.
You can use object 42 to disable the nightlight.
DESCRIPTION OF APPLICATIONS
6. MOTION DETECTION
When movement is detected, this status is maintained for the preset time
period. Then, several requests are sent to the sensors each second to determine
whether further motion has been detected (object 33). You can use one of the
parameters to set the sensor's level of sensitivity.
Object 32 can be used to lock motion detection. The LED will display the
colour selected to indicate this.
The sensitivity of the 4 sensor areas (see p. 3) can be adapted individually
according to requirements (not for version PD-C360i/24 KNX ECO UP).
7. PRESENCE SIMULATION
The detector keeps a constant record of if and when movement has been
detected, for a period of 1 week. An ON telegram via object 41 can then
be used to switch the channels on or off according to this weekly record. The
stored time lapse is taken into account. Normal motion detection also remains
active during this process.
8. EXTERNAL MASTER/SLAVE
This parameter can be used to determine whether the external Master/Slave
only sends ON telegrams when motion is detected, or whether the external
device sends an ON telegram when motion is detected and OFF telegrams
when no movement is detected.
