ESTeem 195C, Руководство пользователя, Страница: 60 / 75

APPENDIX C
MODEL 192 INTEGRATION
Revised: 15 Feb 2017 APX C-2 ESTeem Models 195MHC
Note that the correct utility
version will display “Legacy
192 Radio Support” in red
letters at the top. Select the
Firmware tab and press the
Update Firmware button.
You will be asked if you wish
to downgrade the firmware
version. Press Yes to
continue. The utility will load
the correct firmware version
to the ESTeem Model 195C or
195M (Figure 3).
Configuring Model 195M/C for Model 192
The ESTeem Model 195C and 195M must be set to 192
compatibility mode to communicate with an ESTeem
Model 192. To configure for compatibility select the
Model 192 Compatibility tab (Figure 4) and set 192
Compatibility to ON. This will set the software
command (192compat on) for 192 compatibility.
The ESTeem Model 195C and 195M must then be
“trained” to communicate with an ESTeem Model 192.
First set the 192 compatibility to ON and press the Set
button. Enter the remote address of the Model 192 and
press the Train to Remote button. The Model 195M/C
will begin training to the remote ESTeem and will save
the configuration once complete (Figure 2). Verify the
communication using the 195M/C Diagnostic utilities.
Figure 3: Selecting Model 192 Compatible Utility
Figure 4: Training Model 195M/C