Mounting Gate Operator(s) & Finding Limits
E-S 1000D Series Instruction Manual
3.1
1)
Slide the rear of the gate operator
into the boomerang bracket. Next,
secure the operator onto the bracket
with a connector pin.
2)
Utilize the C-clip pliers in order to
attach a C-clip on the bottom side of
the connector pin.
3)
Move the gate along with the
operator to the open position.
Manually turn
the piston until it fits
the bracket that is mounted on
the gate.
Post
G
a
te
4)
Temporarily secure the front of the
arm with a clevis pin. You will be
locating and setting the limits in the
next page.
Содержание E-S 1000D Series
