background image

 

Programming 

WED FEB 6, 1994 11:16:35             Remote Alpha-Numeric Display Network 

PARAMETER ENTRY for SELECTED DISPLAY 

Current Project File:                        Select Display: 1        FCC 
        Project Name:                     (Comm - No Printer Available) 
            Location:                             Baud Rate9600 
A
nnunciation Type(s): Alarm + Super Trouble Routing: All Messages 
             Routing: All Messages        
 Active When Enabled:    
Active When Disabled:                                FCC Text: OFF 

L Enter Location   C Select FCC Text         P Select Printer 
A Select Annunciation Type(s)                B Select Comm Baud Rate 
E Select Active When Keyswitch Enabled       R Select Routing of Mess 
D Select Active when Keyswitch Disabled      T Transmit to Display 
N Set to No Switch Panel                     H Print Hard Copy (or File)  

INSTRUCTIONS 
Press letters R, A, C, L, E, D, or B to alter the corresponding item. 
Press letters N, T, or H to execute the action stated. 

Press TAB to move to the next screen and enter or edit messages. 
   

The Selections shown Above will be saved. 

Press ESC to return to prior menu-Selections shown will be saved.

 

FCC Selected Display Menu 

Verify that the address of the first display to be configured appears in 
the Base Address window for IRC-3 operations or the Selected Display 
window for FCC operation. If not, return to the previous screen by 
pressing ESC, then moving the cursor to the Base Address or Selected 
Display window by pressing S and using the Up or Down arrow keys 
until the desired address appears in the window. When the desired 
address appears in the “Base Address” or "Selected Display" Window 
press TAB to save the network configuration and return to the 
"Parameter Entry for Selected Display" screen. 

Note: 

All information displayed on this screen applies to the LSRA 

whose address is displayed in the 

Base Address 

or

 Selected 

Display

 window. 

The “Parameter Entry for Selected Display “screen is the 

first

 of two 

screens used to configure each LSRA (phase 2), and enter its messages 
(phase 3). 

Enter the required annunciator information for the parameters listed 
below. Detailed parameter specifications may be found in the 
Parameter Descriptions and Specifications section of this chapter. 

 Location 
 

Annunciation Type (FCC only) 

 

Active When Key Switch Enabled 

 

Active When Key Switch Disabled 

 

No Switch Panel 

 

Printer (Not available on 

first

 and 

last

 address display panels 

on FCC) 

 

Communications Baud Rate (when local printer attached) 

 

Routing (FCC only) 

 

FCC Text (FCC Only) 

Note: 

The data for multiple IRC-3 mode annunciators may be saved 

under the same filename, as long as each annunciator has a different 
network address. 

LSRA

 Installation, Operation, Maintenance, and Configuration Manual 

4.11 

firealarmresources.com

Содержание LSRA





























































































Отзывы: