Operation
Care@Home™ Smoke Detector User Guide
17
WARNING!
Do not stand close to the SK2 when the alarm sounds. Too much
exposure to the buzzer at close range may be harmful to your hearing.
A mounting bracket
The
TEST/MUTE
button, as shown in Figure 10 on page 15, enables you to test the SK2
functionality. For more information about the
TEST/MUTE
button, see section on
5.2 on
page 21.
Three LEDs to indicate the device status as follows:
Power:
Green
Fault:
Yellow
Alarm:
Red
4.2.
Features
The following are the characteristics and features of the SK2:
RF communications with the CP allows for SMS and e-mail notifications.
The RF connectivity with the CP can reach 700 m (2,300 ft.) in open air.
The SK2 complies with all the following major electromagnetic standards for smoke detectors:
Compatibility
Interference
Safety
Security
Reliability
Environment
4.3.
Indications
Table 1 below defines the indications represented by the LEDs. The combination of the LED color,
flashing or steady LED display, and sounds emitted by the SK2 differentiate between the various
situations.
