Maintenance
Care@Home™ Smoke Detector User Guide
21
Figure 13 – Return SK2 to Base While Aligning Tabs
If the SK2 is not mounted onto the bracket correctly, a loud continuous tone is triggered.
Caution:
Use only the type and make of battery specified in the device
specifications listed in Table 3 on page 25. The SK2 may not operate properly
with any other kind of battery.
5.2.
Testing the SK2
Test the SK2 once a month or at any time the device appears not to be working.
To test the SK2, push firmly on the
TEST/MUTE
button until the buzzer sounds and all the LEDs flash.
The
TEST/MUTE
button tests all the functions as required by Underwriters’ Laboratories.
Caution:
Never use an open flame of any kind to test the SK2.
