Installation
Care@Home™ Smoke Detector User Guide
13
Figure 7 – The Battery Compartments
NOTE:
After you insert both batteries into the SK2, the tamper alarm sounds.
This means the SK2 is working normally and indicates that the batteries are
positioned properly.
Holding the SK2, move at least 2 m (~6 ft. 7 in.) from the CP.
10.
Ensure that the pairing process is successful. The process can have the following results:
11.
If the pairing process is successful, the CP beeps and the ring, around the CP
EMERGENCY
button, blinks
Blue
three times.
If the pairing process is not successful, the CP beeps and the ring lights up
Red
for two
seconds.
If the peripheral device is already paired, the CP beeps and the ring lights up alternating
between
Blue
and
Red
.
If no additional peripheral devices can be integrated, as when the CP memory is full, the CP
beeps and the ring lights up
Red
.
The CP returns to its previous operation mode automatically following the pairing process.
Align the SK2 slots with the bracket tabs, as illustrated in Figure 8 below, and insert the bracket
12.
tabs into the SK2 slots.
