Installation
12
Care@Home™ Smoke Detector User Guide
Figure 6 – The Mounting Bracket
Remove the bracket from the ceiling (or wall).
5.
Drill a hole at each of the marks using a 5 mm (3/16-in.) drill bit and insert the dowels.
6.
Caution:
When you drill the holes, prevent the dust from getting on the SK2.
Mount the bracket to the ceiling (or wall) using the screws.
7.
WARNING!
Do not connect the SK2 to any other alarm or auxiliary device.
Connecting anything else to the SK2 prevents the proper operation of the
alarm.
Press the
PAIRING
button, located on the right edge of the front of the CP, for five seconds. The CP
8.
beeps and the ring, around the
EMERGENCY
button, lights up in
Blue
with a circular movement
effect.
Insert the two batteries into the battery compartments, according to the polarity marks (+, -).
9.
Bracket tabs
Mounting
screw holes
