Installation
20
Care@Home™ Pro System Installation Guide
Figure 8: Location Label Adhered to a Peripheral
NOTE:
For PIR and IPD, do not apply location labels on the lens.
For additional peripherals, apply the appropriate label when the installation mode identifies the
activity type of the peripheral.
3.4.3
Installation Mode Guidance
Pre-configuration of the CP and its peripherals allows the CP to recognize each of the peripherals when
they are activated.
For example, after you insert the batteries in the PIR assigned to the bedroom and move 2 m (6 ft. 7 in.)
away from the CP, the CP recognizes the PIR and announces the assigned location: bedroom.
When you test the peripheral installation in the bedroom location and the PIR detects movement, the
CP announces the name of the room assigned to the PIR. This is verification that the PIR is installed
correctly and is communicating the movement detections to the CP.
