Installation
18
Care@Home™ Pro System Installation Guide
3.4.
Mapping Peripherals to their Locations
The peripherals in the kit are pre-configured to communicate with the CP included in the kit. Each
peripheral is assigned a location on the premises where the peripheral must be installed.
Essence provides you with a few ways to ensure that you install the peripherals in their assigned
locations.
Kit label
Location labels
Installation mode vocal instructions
3.4.1
Kit Label
Figure 6 shows the label on the inside of the Care@Home
™
kit cover.
The label lists the CP and the peripherals included in the kit and shows:
The location assigned to the peripheral
The Essence part number of each device
The barcode and serial number of each device
Figure 6: The Care@Home
™
Kit Inside Label
Any additional peripherals added due to additional rooms or doors on the premises, such as a second
restroom, a guest bedroom, or a back door, do not appear on the label.
