Installation
Care@Home™ Pro System Installation Guide
17
Check the cellular reception of a mobile device using the same cellular service provider.
Ensure the reception level is at least two bars.
Check the GSM
coverage in the
CMS Panel Info
window or the
CMS Home
screen after
connecting the CP to the CMS application. Ensure the cellular reception is at least 80%.
For information about the CP GSM coverage, refer to
Panel Info Window
in the ESUG05074
Care@Home
™
Pro ADL CMS Reference.
NOTE:
Do not replace the back cover of the CP until after you complete the
installation process.
3.3.
Activate the Installation Mode
Since the peripherals are pre-configured to their assigned locations, the CP can help guide you
through the installation process using vocal announcements. This is the
Installation Mode
program.
To enable
Installation Mode
:
1.
Locate the
TEST
pinhole on the back of the CP.
2.
Insert the open end of a paperclip or probe into the pinhole, as shown in Figure 5.
3.
Push the paper clip or probe in the pinhole until you feel a click. The CP announces “Installation
test starts.”
Figure 5: Enable Installation Mode
TEST
Pinhole
