Escient FireBall DVDM-100, Инструкция по установке и эксплуатации

Страница: 140 / 185

P
AGE
140
F
IRE
B
ALL
DVDM-100 I
NSTALLATION
& U
SER
’
S
G
UIDE
- M22003-01A1
C
HAPTER
10 - T
OUCHSCREEN
O
VERVIEW
Elan VIA! Touch Panel Configuration
Using FireBall DVDM-100 with the Elan VIA! system is quite easy. You can use Elan
System Controllers or direct VIA! touch panel connections. FireBall DVDM-100 uses a
special screen overlay to provide VIA! touch panels with the required control points. You
will need to have the latest VIA! Tools. Please contact Elan for more information.
Connect FireBall DVDM-100 to the Elan VIA! Touch Panel
1) Route the IR output of the VIA panels to either the direct IR port of the FireBall
DVDM-100 (recommended) or use an emitter on the front of the FireBall DVDM-100
(IR receiver is located on the right hand edge of the display window.
2) Connect the video out of FireBall DVDM-100 to the VIA panel.
3) Using new version of VIA tools, select custom overlay template, and choose FireBall
DVDM-100 as a component in the VIA panel
Configuring FireBall DVDM-100 for Elan VIA! control
1) Press SETUP->AUDIO VIDEO AND COM PORTS-> COM PORT SETTINGS.
2) Navigate to the IR FRAME button and press the SELECT key until the button is set to
ENABLE
3) Navigate to the SAVE button and press the SELECT key.
4) Press SETUP to exit the setup menus. The Elan VIA! IR frame should now be visible
on all video outs. Make sure the FireBall DVDM-100 video is being routed to the VIA
panels.
Music Guide Screen with
Elan VIA! IR Frame Overlay