Esaote MyLabX75VET, Начало работы

Страница: 51 / 138

M Y L A B O V E R V I E W
MyLab
- G E T T I N G S T A R T E D 3 - 7
GETTI
NG STARTED
In addition, the entire apparatus, of which the monitor is an integral part,
complies with the mandatory standards of biomedical equipment (safety
according to IEC 60601-1 Ed. 3.1 and EMC according to IEC 60601-1-2 Ed.
4).
On/Off Button (2)
The
O N /O FF
button is located beside the touchscreen, on the left side of the
control panel assembly, while the Main Switch and the power cable socket
(18) are located on the rear-bottom of the device.
Beside the Main Switch is also located an earth terminal to be connected to
an external protective earthing system as additional protection.
When
MyLab
is connected to the mains and the Main Switch is on, the lighting
of the
O N /O FF
button changes to indicate its status. The different indicators
are described in the table below.
Table 3-3: On/Off button light
Pressing the
O N /O FF
button turns
MyLab
on or off, activating or closing the
examination session.
Optional Batteries When
MyLab
is equipped with optional batteries, the same button can be
configured in order to place the device in stand-by, partially shutting it down:
in this case the initialization phase at start up is significantly reduced.
NOTE
A complete shut down procedure is periodically and automatically run to
prevent misfunctioning: when this occurs,
MyLab
displays an information
message. The following start up will require running the whole
initialization phase.
Led Colour Meaning
GREEN
MyLab
is on
AMBER
MyLab
can be turned on
OFF
MyLab
can not be turned on, unless an optional
battery pack is mounted.