Esaote MyLabX75VET, Начало работы

Страница: 76 / 138

MyLab
- G E T T I N G S T A R T E D 5 - 1
Chapter
5
GETTI
NG STARTED
5. Using MyLab
This chapter provides a brief description of the device controls.

AO
Refer to the “Advanced Operations” manual for further detailed information.
Connecting MyLab to the mains
The power plug and the electrical main switch are located on the rear-bottom
of
MyLab
. The power plug symbol is screen-printed on the console plastic.
Procedure 1. Plug in the power cord.
2. Connect
MyLab
to the power mains.
WARNING
When installing
MyLab
, check that the power cable is not tightly bent, that
it can’t be squashed by a misplaced foot or by heavy objects.
The earth terminal can be connected to an external protective earthing system
as additional protection. This connection is not necessary in most cases and
is only recommended for situations involving multiple equipment in a high-
risk patient environment to provide assurance that all equipment is at the
same potential and operates within acceptable leakage current limits.
Turning MyLab On and Off
At the examination site:
1. Place
MyLab
into its final position.
2. Rotate the control panel assembly into its working position.
3. Set the control panel height into a comfortable position.
4. Engage the wheel brakes by pressing the pedals fully down.
5. Position the monitor where you want it.