-- 43 --
bu12d04a
7
MEMORY FUNCTION
The controller can store up to
99 sets of weld data
. Each of these sets is given a
number from 1 to 99. If the weld data memory is full, i.e. if 99 sets of data are
already stored and you want to save an additional set of data, then the
oldest set of
weld data is automatically deleted
.
You can also
delete
and
copy
sets of weld data and
recall
a set of weld data to the
working memory.
Following are examples showing how to store, recall, copy and delete data.
7.1
Store
When you want to store a set of data. first make sure that the main menu is
displayed. Press the MEMORY button.If the weld data memory is empty, the display
will appear as follows.
MEMORY FUNCTIONS -- STORED WELD PARAM.
:
NO STORED DATA SETS
:
STORE
QUIT
Example
We will now store a set of weld data. We will store it in memory location 10. Press
the STORE button. The display will appear as follows.
STORE MEMORY NO. 1
If you press ENTER
here. the data
setting is stored as
number 1. which
appears in the
uppermost line in the
character display.
QUIT
ENTER
By using one of the plus/minus buttons you can indicate which memory location you
will give the data set--up. This appears in the uppermost line in the character display.
