6
6.3 Positioning the carriers on the rail
- With a size 4 Allen wrench loosen the half-way wheel (anti-derailing
wheel) and move to the lowest position of the slot.
- Put the carriage above the carriageway of the support profile.
- Once the carriage is on track, move the anti-derail wheel up and
secure it.
6.4 Place the fixed leaves
- Attach the fixed leaves, in accordance with the manual of the profile
to be installed.
6.5 Fasten the leading edges to the sliding leaves
- Secure the leading edge brackets to the sliding leaves as in the
drawing, the centre of the leading edge must be approx. 130 mm
from the sides of the moving sheet.
- Fasten the M8x25 screws with a size 13 wrench (2 per leading
edge).
- For all profiles, make the holes at the following measurements at
the 2 ends.
130
74
92
92
82
130
-
With a sliding leaf and electrolock, the centre of the leading edge
must be approx. at 175mm.
6.6 Hang the leaves on the carriages
- Secure the leading edges on the carriages with M6x16 Allen
screws, the toothed washers and flat washers.
Ertain Carrier
Anti-derailing wheel
Anti-derailing wheel
