19
2
1
1.- Radar Interior
2.- Radar Exterior
Activation sensors
Activation sensors issue the signal to open the door when it´s closed or closing.
Usually thay are installed in the centrer of the operator, one outside above lintel, and
the other inside on the cover of the operator.
- Connect internal sensor wires to the control board directly
- Connect the external sensor wires directly from the center of the operator or passing
them to the edge of the operator from the left hand side.
- View the following diagram to make the connections:
- Connections:
- Sensor set up
To access the “Technical menu”: Press following 3 buttons during 1 second : Door open, door close and winter.
,
,
Once inside menu, choose the following set up for sensors:
Technical menu
Setup
Basci functions
Advan. functions
Sensors
Movement param.
Sensors
Activ. Sensors
Photocell
Safety sensor
Test activation
Activ. Sensors
Internal
External
Internal
NO
NC
