15
Mains connection
For proper commissioning, it´s advisable to pass mains wires from the right hand side of the machine.
The recommended cable is a three wires one with a mininum wire section of 2,5.
The power supply unit is formed by a transformer, Ni Cd batteries and switchboard unit which has an ON /OFF switch, a
network filter and a 2 A protection fuse. To remove the fuse you have to take out the plastic cover.
Warning
:
Ensure to remove the mains before connecting power supply wires.
Pass the cable over the cable gland and then clip it into the support profile and take it to the power supply unit.
In order to eliminate electrical derivation and static tension, once the power cable is connected, it is advisable it´s
recommended to connect ground wire to the chassis or support profile.
