24
Digital selector
Warning! The digital selector is essential for commissioning.
The digital selector is the communication device between the user and the control board, which can be used to carry
out the following actions:
1.- select the door´s working modes.
2.- Set up different function parameters
3.- Activation and deactivation configuration options
4.- Troubleshooting and error mode diagnosis
The digital selector has 6 buttons to select and adjust options and a display to show we can see and adjust the diferent
optiond of the operator. The display is usually in energy saving mode with low light until any button is pushed,at which
point the display will fully light up and any parameters and configuration are displayed.
-
When the door is working,the display will show the working mode that is activate at that time.
- To lock the digital selector ( so that no one can change the mode): push following buttons at the same time:
and
. To unlock repeat the sequence.
-There is also another option for locking the digital selector that no unauthorized person can use it. There is a lock input
in the selector inputs where a key can be connected . If the input is locked settings are anaccessible.
The settings and configuration with the digital selector are explained in the chapter 9.
