DigiOpG2
Digital Video Recorder
Page
43
3040-00052
6.10
Alarm-Output
This is to set alarm actions regarding recording and relay output.
6.10.1.
Relay
Select the relay number to operate.
6.10.2.
Alarm Mode
Select either Set or Duration depending on the desired alarm action.
Set:
In this mode, the alarmed camera will be recorded (at the recording speed described in 6.9.1) during the setting time in Dwell
tab from the moment sensor is activated. i.e. Sensor activation triggers alarm-activated recording, regardless of the
deactivation of the sensor during alarm action.
Duration:
In this mode, the alarmed camera will be recorded (at the recording speed described in 6.9.1) upon sensor activation. i.e. The
deactivation of the sensor stops the alarm-activated recording.
The corresponding relay will function in accordance with recording if the relay output is selected in the sensor, i.e. the relay
starts when alarm-activated recording starts and ends when alarm-activated recording stops.
6.10.3.
Dwell
Set the period for which the alarmed camera will be recorded and the relay output is turned on. The recording stops and
alarm output is turned off when the setting period is elapsed. Set the alarm-operating period (5~99 seconds).
