DigiOpG2
Digital Video Recorder
Page
42
3040-00052
6.9.2.
Start & End
Select the sensor start and end time to set the sensor-operating schedule. Ranges for start and end time is identical to
recording schedule for the camera. Hour display format is 24-hour basis, and default is “0~24”. For example, if setting
schedule is 6~18, then sensor input operates from 6:00:00 to 17:59:59.
Note
Be cautious when setting the alarm schedule. If the sensor is inputted outside of time of the schedule, the system
will ignore the activation of the sensor and take no action.
6.9.3.
Type
Select the sensor type between N/O(Normal Open) and N/C(Normal Close). Circuit of N/O type is usually open, and the
activation of the sensor occurs at the time of close, and N/C type works the reverse way.
Note
Check the setting of the sensor type (N/O or N/C), if the sensor does not operate properly.
The alarm might not function if the actual connecting sensor type and the sensor type in the system setting are
inconsistent.
