DigiOpG2
Digital Video Recorder
Page
14
3040-00052
3.
Installation
3.1
Connecting Peripheral Devices
This section describes how to efficiently hook up peripheral devices for usage with the EDNS-3000 series.
Install the EDNS-3000 series on flat surface. If required, attach the rubber mount for installation. If 19-inch rack is used, it is
recommend to install the system on shelve and use 2.5~3U (1U=1.75 inch or 4.45cm) space for proper ventilation.
Note
Install system in location with good ventilation to prevent overheating.
Caution
Depending on the grounding, the coaxial cable connecting to the camera has danger of electric shock. Shut
down power of the system completely (unplug the power cable) before connecting video cable to BNC port.