DigiOpG2
Digital Video Recorder
Page
8
3040-00052
2.1.9.
PAN/TILT/ZOOM/ FOCUS/IRIS
Press this button to control PAN/TILT/ZOOM/FOCUS/IRIS value in sequence. This is when PTZ driver has been installed in the
camera.
2.1.10.
SETUP
Set the environment of the EDNS-3000 series according to the user requirement.
2.1.11.
SEARCH
Search the recorded image by date and time. Refer to “Recording Image Playback Mode” for detail image searching method.
2.1.12.
Jog / Shuttle
Jog / Shuttle dial is used to playback recording images. The inner dial is called Jog and the outer dial is called Shuttle. The
Jog/Shuttle dial has two kinds of functions. The Jog is used to find the recording image frame by frame. Turn the Jog dial
clockwise or anti-clockwise (only I-Frame is playback during anti-clockwise) to see the image frame by frame during pause
state. The Shuttle is used to speed up the playback speed of images by clockwise or anti-clockwise. Playback speed is
indicated as x2, x4, x8, x16, x32 on the lower end of the screen.
2.1.13.
USB Port
Use to backup recorded images of the EDNS-3000 series by using USB storage device. System software upgrade is possible
with USB storage device.
Note
Refer to “Image Backup” for detailed explanation of USB storage devices supported by EDNS-3000 series.
2.1.14.
BACKUP Button
Use to back up images recorded in the HDD to a supported storage device. When this button is pressed, the information from
the backup device connected to EDNS-3000 series (ex. CD-RW drive) will be indicated on the screen.
Refer to “Image Backup” for detailed information about backup.
2.1.15.
EVENT Button
Shows system setting changes, alarms, etc., by the order of time and brings up event viewer to search image of the
corresponding time. Refer to “Event Search” for further details.
.
2.1.16.
RETURN Button
Use to cancel the password just typed at the setting menu or to return to previous menu.
2.1.17.
OSD Button
OSD will initially be displayed on the screen. When the [OSD] button is clicked once, the OSD will disappear. Click [OSD] button
again and the text will reappear.
2.1.18.
P/T/Z Button
Click [P/T/Z] button and an icon will appear on the lower right end of the screen image to show P/T/Z status. This is when
P/T/Z driver has been installed.
2.1.19.
SEQ Button
Press [SEQ] button and screen will automatically change. Refer to “Settings” for automatic sequencing interval (does not work on 16
split screen mode).
2.1.20.
ENTER Button
The [Enter] button is used to go into the next stage, select value, or setting.
