Use and maintenance manual
Automatic die cutter
Model: DC-200
____________________________________________________________________________________________________________________
P a g . 1 6
We place the second end of the belt with the opposing face upward on the same left side and
repeat the same operations.
DIE CUTTING A-B for High profile belts at 90º
We select function A-B if it is not activated.
We mount the die chosen: 80x10 or 120x15.
We program the relevant gauge for the die mounted and program the width in centimetres.
We adjust the cutting pressure according to the hardness of the belt and the blade length.
First, we place the first end of the belt on the left side by the guide rail and then position the end
of the belt just by the O Ref. mark, in order to mark the relevant material insertion measurement
according to the die we wish to cut with.
