Procedure
Note:
The four batteries to be installed are referred to as battery 1, 2, 3, or 4
respectively. The numbers refer to the battery positions on the battery
shelf, where battery 1 is installed on the far left, followed by batteries 2,
3, and 4 in order. See Figure 34 on page 31.
2.
Remove the protective caps of each battery.
3.
Attach the adhesive pads, shown in the figure below, to the right-hand
sides of batteries 1 and 3.
Figure 31
Adhesive Pad Attachment
4.
Attach the temperature sensor holder to battery 2. Remove the inner part
of the holder and attach it according to the figure below.
Figure 32
Temperature Sensor Holder
Note:
For each battery the rear strap end must be brought over the battery
to the front.
5.
Place battery 1 on the far left of the shelf.
29
1/1531-COH 109 2073 Uen H 2006-11-06
All manuals and user guides at all-guides.com