Ericsson R290SAT, Руководство пользователя

Страница: 53 / 71

45
R290 User’s Guide
If you do not wish to accept the waiting call but you have not explicitly
rejected it, it will time-out and go away.
Dealing with Multiple Calls
Placing a Second Call and holding the Current Call
If you are engaged in a call and wish to make or accept a second call
without losing the original call, enter the number you wish to dial and
press
YES at any time. If the network accepts the request, the number
which you entered will be dialled and the current call will be put on hold.
The phone will display the message ‘
Call On Hold ’, to remind you that
your original call is still held.
To terminate both the active and held calls, press NO . Any waiting call
will not be affected
Receiving/placing a Third Call
If you already have a call on hold and you receive a third call, you will be
notified of this call in the same manner as before. You are able to accept
or reject it from the Call Waiting In-Call Menu.
You will not be able to select ‘Hld+Accept’ from the menu. If you
attempt to select this option, the message ‘
Call Already On Hold ’ will be
given before reverting to the in-call display. If you wish to accept the new
call, you will need to end the current call first.
If you want to make an outgoing call when you are currently involved in
two calls, you must first end one of the current calls.
Switching between Active Call and Call on Hold
When you are dealing with two calls, one active and another on hold, you
can switch between them or end either one by using the Call Hold In-Call
Menu.
1. Press SOFT LEFT from within the current call and the Call Hold In-
Call Menu will appear:
2. Press
2
to Switch calls.
NOTE:
The network always gives privacy between held and active calls.
Placing a Call when the Called Party is Engaged
If you make an outgoing call to a party that does not have call waiting
activated and is already engaged in a call, your call will be cleared down.
If the party does have call waiting activated, you may have the option of
waiting for a period determined by the network until the called party
becomes free. If the time period expires, your call attempt will be rejected
or diverted.
The network will alert you that call waiting has been invoked and the
RINGING TONE will continue. The message ‘
Waiting ’ will be
displayed until the call is answered, cleared, rejected or diverted.
Call Termination by Calling Party with another Call
Held
If the active call was terminated by the calling party and there is a call on
hold, this can be retrieved or rejected. Press
SOFT LEFT and select
desire action from the menu. If you use the
NO
key all calls will be ended.