Ericsson R290SAT, Руководство пользователя

Страница: 56 / 71

48
R290 User’s Guide
List, accessed by using option 4 in the Conference Menu, to identify
which remote party has put their call on hold. If, while reviewing the Call
List, a remote party places their call on hold, the message ‘
Conference
Member Placed Call On Hold ’ will be displayed for four seconds before
the display returns to the updated Call List.
If a remote party terminates their call, you will hear the normal call
ending tone and the call ending message will be displayed in the normal
way. The message ‘
Call X Ended ’ will then be displayed, where X is the
call number (1 - 5) of the remote party that terminated their call. The call
will then be deleted from the Call List. If a remote party terminates their
call while you are reviewing the Call List, this message will be displayed
and you will be returned to the updated Call List.
If no parties remain when the remote party is disconnected, the
conference call will end.
Remote Party Notification
When a remote party joins a conference, the network may send
notification that they are part of a conference call, by giving the message
‘
Conferencing’ . When further remote parties are added to the conference
call, the remote parties may be notified of this.
Call Control Public MMI Commands Summary
When you are in a call, the call control commands can be accomplished
without going into the menu by keying in one of the following GSM
commands:
Call Barring
The call barring service lets you control which kind of calls can be made
to or from your phone. This feature is convenient if you lend your phone
to somebody else. This feature is service dependent.
To Check the Call Bar Status
1. Press SOFT LEFT , 5 to enter Advanced menu.
2. Press
3
for Call Bar menu.
3. Press 1 for Status.
4. Press 1 to review the Outgoing Call Bar Status. The network will
respond with one of the following messages:
No Outgoing Call Restrictions
All Services Barred Emergency Calls Only
0 YES
Releases all held calls or sets User Determined User
Busy (UDUB) for a waiting call.
1 YES
Releases all active calls (if any exist) and accepts the
other held or waiting call.
1X YES
This ends the active call X (used in conference calls).
2 YES Places all active calls (if any exist) on hold and accepts
the held or waiting call.
2X YES Places all active calls on hold except call X with which
communication shall be supported (used in conference
calls).
3 YES
Adds a held call to the conversation (i.e. merges the
active and held calls to form or add to a conference call).
NO
This ends all active and held calls, but not those that are
waiting.
Tel No. YES
This places the active call on hold and sets up a new call
to the telephone number dialled.