20
R290 User’s Guide
Using the Phone Book
This chapter describes how you can store phone numbers both on your
SIM Card and in your phone’s own memory.
About the Phone Book
You can store phone numbers both on your SIM Card and in your phone’s
own memory. The difference between the two is that you can remove the
SIM Card and use all those telephone numbers in other phones, while the
phone’s memory always stays the same no matter which SIM Card is
inserted.
You can store up to 99 phone numbers in the phone memory. The number
of phone numbers you can store on your SIM Card is SIM Card
dependent (limited to 100).
International Numbers
If you intend to use your phone book both at home and abroad, you should
store all phone numbers as international phone numbers, i.e. with the
international prefix “+” and the country code before the area code
(without any leading zero) and the number.
To enter the “+” prefix, press and hold the
0
key until the + appears.
Speed Dialling
The phone numbers that you store in positions 1– 9 on the SIM Card can
be called by a long press on the position number. You should, save
positions 1– 9 for important numbers.
To Store a Name and a Number into a
Selected Memory Store
1. Press and hold
MEM
for at least half a second. The display will be:
2. Enter the first letter of the name by pressing the appropriate numeric
key as many times as required (see Tables for all characters). To
change the character set to lower case press the
SOFT RIGHT
key.
NOTE:
Pressing the
SOFT RIGHT
key will cycle the character sets through
Upper case, Lower case, Numeric, Greek and back to Upper case. The
current mode is shown in the bottom right corner of the screen with the
characters ‘ABC’ corresponding to Upper Case, ‘abc’ for Lower Case,
etc.
3. Enter the next letter when the cursor has moved to the next letter
position. The Name may be up to twelve characters depending on the
type of SIM you are using.
4. Press
SOFT LEFT
to move to the next line.
5. Enter the telephone number. If you enter more than eleven digits in
the telephone number, the remainder will not be displayed and a
diamond character will be shown to the left of the display.
6. Press
SOFT LEFT
to move to the next line.
7. Enter the store number you want (for example 003) and press
YES
.
To store your number on the SIM card enter a number between 1 and
100. To store your number in the phone enter a number between 101
and 200.
Содержание R290SAT
Страница 11: ...3 R290 User s Guide The Phone ...
