Ericsson R290SAT, Руководство пользователя

Страница: 62 / 71

54
R290 User’s Guide
NOTE:
When you reach the end of the message, you can display the sender’s
telephone number by pressing
SOFT LEFT . Pressing SOFT LEFT one
more time will display the service centre’s telephone number. If you have
these numbers stored in memory, the associated “name” will also be
displayed. A further press of
SOFT LEFT
will display the message type,
for example ‘Text ’.
If you wish to read the next or previous message, press
>
or
<
. The display
will jump to the top of the relevant message. To exit the message and
return to the standby display, press and hold
NO
.
Saving and Dialling a Number Received in a Message
1. Scroll through the message until the telephone number is displayed.
2. Press and hold
MEM
to store the number. If more than one number is
shown on the display, your phone will recognise the first one
contained completely within the current 4 line display. You can save
this number in memory in the normal way or you can dial it directly
from within the message.
3. To store the number in memory, the telephone number is
automatically entered into the Number? field of the memory store, all
you have to do is assign a “name” and memory store number to it.
When you complete the store operation your phone will return you to
the message you were viewing.
4. To call the number, press
YES
. When you end the call, your phone
will return to the standby display.
Deleting a Message
As the memory space allocated to storing messages is limited, you will
have to periodically delete old messages. You can delete messages while
you are viewing the received messages directory and also while you are
within a message.
Scroll to the message you wish to delete using the SOFT keys and press
long
CLR
. ‘ Delete Message? ’ is displayed. Press
YES
to delete this
message and your phone will return to the store. If you delete the last
message, your phone will display ‘
No Messages ’ before returning to the
Message Menu display.
If you wish to delete a message while you are reading it, press long
CLR
from within the message. ‘ Delete Message? ’ is displayed. Press YES to
delete this message and your phone will jump to the top of the next
message.
Press
NO
to exit either of the two delete operations without clearing the
message.
To Select Message Tones
The message alerting tone can be set to occur once only or to repeat once
every minute until the message is read, the
NO
key is pressed, or the
phone is switched off.
1. Press
SOFT LEFT
,
3
to enter Messages menu.
2. Press 3 to display the Tones menu.
3. Press 1 , 2 or 3 to set the message announcement tones to single play,
repeating (once a minute) or to disabled. A confirmation message is
displayed before your phone returns to the standby display.
In a call, the tones are produced once only to avoid disrupting the call.
Press
NO to exit without changing the current setting.