Ericsson R290SAT, Руководство пользователя

Страница: 47 / 71

39
R290 User’s Guide
4. Enter the new PIN digits again to confirm and press YES. The
display will show ‘ New Phone PIN Accepted ’ before returning to the
Setup Menu.
NOTE:
• If you enter the old PIN incorrectly, the message ‘ Phone PIN Error ’
will be shown. If it is entered incorrectly three times, the phone will
become disabled.
• If you make a mistake when confirming the PIN, the message ‘ Phone
PIN Confirmation Error ’ will be shown and you will be asked to re-
enter the new PIN again.
• When the PIN has been successfully confirmed, the phone will return
to the Setup Menu.
• If the Master SIM (the SIM fitted when the phone PIN was first
enabled) is not used when attempting to change the phone PIN, the
message ‘
Request Rejected ’ will be given.
If you cannot find the Master PIN, contact your service provider.
Unblocking with Personal Unblocking
Key (PUK)
When you buy your SIM Card, you obtain a 4- to 8- digit Personal
Identification Number (PIN) and a Personal Unblocking Key (PUK). The
PIN is the code that you enter to get access to and activate your
subscription. PIN 2 is used with special functions, such as Advice of Call
Charge. The PUK (and PUK 2) is a code that helps you unlock your
phone when you have forgotten the PIN (PIN 2).
If you have entered the PIN incorrectly three times in a row enter the
following from standby:
* * 0 5 * SIM PIN1 Unblocking Key
Then enter the new number.
* New SIM PIN1
Enter the new number again to confirm.
* New SIM PIN1 #
Card Lock (SIM PIN)
The card lock protects your SIM Card. When the card lock is active, you
will always be prompted to enter your PIN at start-up.
To Enable the SIM PIN Lock
1. Press SOFT LEFT , 1 to enter Setup menu.
2. Press
2
for Security menu, then press
2
.
3. Press
2
to select Enable.
4. Enter the 4 digit phone PIN and press
YES
. The message ‘ SIM PIN
Enabled ’ will be shown on the screen and the phone will return to the
Setup menu.
To change the SIM PIN
You can only change the SIM PIN when it is enabled.