Ericsson LBI-39224, Руководство по эксплуатации

Страница: 154 / 330

LBI-39224
3-124
is used to define the units, groups, and conventional channels that the
console is allowed to program.
Currently dedicated SAID entries are shown in the Group list.
These entries should not be privileged for any console. It is
recommended that these entries are given a name in the form
SAIDXXXX.
Before privilege lists can be defined System Manager unit and group
uploads must be complete (there would be no database to define from
otherwise). See Transfer From System Manager, Section 3.6.1, on page
3-17 if this has not been previously completed.
At this point in the set up process conventional channels
cannot be added to the privilege list for a console because they
have not yet been defined/programmed. Conventional
channels are programmed in CONVENTIONAL CHANNEL
CONFIGURATION on page 3-148. They can only be added
to the privilege lists and console modules after they are
programmed.
Privilege lists are defined in the
Console Privilege List
dialog box,
Figure 29. From the CEC/IMC Manager menu bar select
Configure System / Console Configuration / Privilege List to
display the
Console Privilege List
dialog box. Three list boxes of
available entities are displayed: Group ID, Unit ID, and Conventional
ID, an asterisk at the right of an entry indicates the entity is enabled for
programming.
CAUTION
NOTE