Ericsson LBI-39224, Руководство по эксплуатации

Страница: 152 / 330

LBI-39224
3-122
and its software version will be displayed in the upper right corner of
the dialog box.
Total Number of Speakers
Select the number of speakers that the selected console is equipped with
from the drop-down list box. Most consoles have two speakers, the
select speaker and the unselect speaker.
Interconnect Hang Time
This is the hang-time required for the Call Director. Select this value
from the drop-down list box, it should be set to 30 seconds (the default
value).
Enable Call Director
Select this check box to enable Call Director if console is so equipped.
If enabled, the Total Number of Speakers should be no more than three.
Call Director ID
This text box displays the Call Director ID (LID), it must match the
System Manager’s Call Director ID for this console.
Delete
Choose the
Delete
button to remove ("delete") a C3 Maestro console
hardware database from the CEC/IMC Manager hard disk. If the
console is no longer used or the console never existed the database
should be deleted. A Message Box will be displayed asking you to
confirm (
OK
) or cancel (
Cancel
) the
Delete
command.
Save and Send C3 Maestro Console Hardware
Configurations
After reconfiguring the C3 Maestro console the new configuration
needs to be saved and sent to the console before the new configurations
will take effect. These actions are performed from the
C3 Maestro Hardware Configuration dialog box. If after making
changes, a send is performed but a save is not, the actual console
operation will differ from the displayed settings upon re-entering the
C3 Maestro Hardware Configuration dialog box.
Save
Choose the
Save
button to perform an immediate save of the currently
selected console's configuration. Other consoles displayed in the list
box located at the top of the dialog box are not saved. The console
configuration is saved on the CEC/IMC Manager's hard disk drive.
Any previous configuration for the console, if present, is erased and