SanaBike 500 easy
Article-Nr.: 2.520132b
Revision: 10/2018
Page 14 of 21
Initial operation
Once the ergometer has been prepared as detailed in chapter
Fehler! Verweisquelle konnte nicht ge-
funden werden.
, it can be connected to a master device (ECG, PC or similar).
Ergometer adjustment
Before the start of each training session, the sitting position needs to be individually adjusted to the patient.
To do so, the saddle height and handlebar position can be adjusted (see chapter
Fehler! Verweisquelle
konnte nicht gefunden werden.
); the following needs to be observed.
Adjusting the saddle position
•
The saddle needs to be in a horizontal position
•
To set the correct saddle height, the patient needs to be sitting on the saddle and touching the pedal
with their heel when the leg is fully stretched and the pedal in the lowest position
Adjusting the handlebar position
•
To set the correct handlebar position, the patient needs to grab the handlebar with arms stretched
while the upper body is slightly tilted forward (angle of approx. 10°)
Pedal in the lowest position
Ergometer adjustment with patient
10°
