Equinox Systems ISP juno, Руководство пользователя

Страница: 42 / 60

ISPJUNO - Portable ISP Programmer - User Guide V0.84 – 17/04/20 41
SPI, I2C signal lines are referenced
to.
8 Programmer I/O3 IO3
•
JTAG – TCK
•
SPI - SCK
This pin can be used for JTAG or
SPI Target Systems.
10 PROG_RESET/VPP O RESET Target RESET control pin
This pin controls the Target Device
RESET pin. It will driven
HIGH/LOW according to the device
type and settings in the <Pre-
program State Machine> tab in the
EQtools project. It is also used to
apply a +12V VPP voltage for some
algorithms.
Key
O - Output from programmer to Target Device
I - Input to programmer from Target Device
P - Passive e.g. GROUND and power rails
N/C - Not connected