Equinox Systems ISP juno, Руководство пользователя

Страница: 34 / 60

ISPJUNO - Portable ISP Programmer - User Guide V0.84 – 17/04/20 33
5.0 Target ISP connection – Selection Guide
5.1 Overview of ISP connectors
The ISPjuno programmer features two 'Target ISP Connectors' which are used to interface the
programmer to the target board / device to be programmed. These connectors are located in the
bottom end panel of the programmer as shown in the illustration below....
The pin-out of these IDC connectors are shown below....
1 2
A full explanation of each pin-out is available in the relevant chapters referred to in the table below...
# Target ISP
connector Connector type Comment Further information
1
Target ISP
Connector
#1 16-way 0.1" IDC female
(bump polarised) Same as
ISPnano 16-way
connector See section 3.3
2 Target ISP
Connector
#2 10-way 0.1" IDC female
(bump polarised) Same as
standard
Equinox 10-way
connector with a
few exceptions See section 3.4