Equinox Systems ISP juno, Руководство пользователя

Страница: 46 / 60

ISPJUNO - Portable ISP Programmer - User Guide V0.84 – 17/04/20 45
6.6 Selecting a project to execute
Once you have located the ‘standalone programming project’ which you wish to execute, it is
necessary to press the key 3 times in order to execute the project as shown in the table
below….
LCD Display message
Press the key to select displayed project.
e.g. PROJECTNAME1
The programmer will then perform a
‘Project Image check ’.
This checks that the project data is valid (not corrupt).
Press the key to execute the selected
‘Standalone programming project’ .
6.7 Project execution mode - sequence
Once you press the to start the key, then programmer will commence the execution of the
selected ‘standalone programming project’ .
LCD Display message
When the programmer is in ‘project execution mode’ …
1. The ‘BUSY’ LED will illuminate.
2. The LCD display will update with the progress of
the project.
Programming…