ISPJUNO - Portable ISP Programmer - User Guide V0.84 – 17/04/20
25
3.7 Customer Target System / Target Supply
It is possible to power the ISPjuno programmer from the customer's target system / PCA.
The programmer takes it power from the Target Board supply via the TVCC and GROUND wires of
the 'ISP cable' which connects between the programmer
'Target ISP Port'
and the
Target System
.
Important note:
This method of powering the programmer is not recommended due to the high current required by
the programmer during the programming process. The target supply must have enough headroom to
supply at least 200mA to the programmer.
Instructions:
•
Connect a suitable
'ISP cable'
between the programmer
'Target ISP Port'
and the
Target
System
•
Connect an
'external power supply'
to the
Target System
.
•
Set the 'current limit' on the
'external power supply'
to a suitable value which can power both
the programmer and
Target System
.
•
Switch on the
'external power supply'
•
The programmer should power up and show text on the display.
Содержание ISP juno
Страница 1: ...User Guide...
Страница 13: ...ISPJUNO Portable ISP Programmer User Guide V0 84 17 04 20 12...
Страница 22: ...ISPJUNO Portable ISP Programmer User Guide V0 84 17 04 20 21...
