Equinox Systems ISP juno, Руководство пользователя

Страница: 15 / 60

ISPJUNO - Portable ISP Programmer - User Guide V0.84 – 17/04/20 14
2.2 ISPjuno programmer - Main Features
Wide ranging Device Support capability
•
Supports In-System Programming (ISP) of many popular FLASH Microcontrollers, Serial
EEPROM and serial FLASH Memories
High-speed Programming
•
Optimised algorithms, on-board project data storage and high-speed line-driver circuitry
delivers the fastest possible programming times
Supports most ISP Protocols
•
Supports the following programming interfaces: AVR - SPI, AVR - JTAG, 8051 - UART, AVR -
XMEGA PDI, AVR - ATtiny TPI, AVR - ATtiny UPDI, Z-Wave – SPI, Z-Wave UART, ARM –
JTAG, ARM - SWD
High-speed JTAG / SWD port
•
Supports high-speed JTAG programming of AVR and ARM microcontrollers
•
Capable of supporting high-speed programming of ARM microcontrollers via the SWD
interface
High-speed SPI port
•
Supports full range of SPI speeds from 10 Hz up to 4 MHz
Fully ESD and Over-voltage protected I/O
•
All Target I/O pins feature both ESD and over-voltage protection
Supports programming at Target Voltages down to 3.0V
•
An optimised driver circuit delivers fast clean programming waveforms from 3.0 to 5.0V.
Excellent Host Control connectivity
•
1 x USB Port (mini-USB connector)
•
1 x legacy RS232 port (9-way D connector)
Standalone Operation
•
Programmer can operate in ‘Standalone Mode’ i.e. without PC Control.
•
Programmer can be controlled via 4-button Keypad / Display.
Supports up to 64 independent 'Standalone Programming Projects'
•
Each project supports programming of a complete device including FLASH, EEPROM, Fuses
etc.
Multiple powering options
•
Programmer can be powered from an external power supply or USB power pack (via DC jack
socket only)
Firmware upgradeable
•
New algorithms and features can be added via a simple firmware upgrade
Compact physical size ideal for held-held production or field use
•
The programmer is designed to be portable so it can be used for production or field use.