Error Messages
Solutions
Maintenance Roller in XX is nearing the end of
its service life.
The maintenance rollers need to be replaced periodically. Paper is not
fed correctly from the paper cassette when it is time for replacement.
Prepare new maintenance rollers.
Maintenance Roller in XX is at the end of its
service life. Replace it and reset the maintenance
roller counter.
Replace the maintenance rollers. After replacing the rollers, tap
Settings
>
Maintenance
>
Maintenance Roller Information
>
Reset
Maintenance Roller Counter
, and then select the paper cassette for
which you replaced the maintenance rollers.
You need to replace Ink Supply Unit(s).
To ensure you receive premium print quality and to help protect your
print head, a variable ink safety reserve remains in the ink supply unit
when your printer indicates it is time to replace the ink supply unit.
Replace to new ink supply units.
Paper Setup Auto Display is set to Off. Some
features may not be available. For details, see
your documentation.
If
Paper Setup Auto Display
is disabled, you cannot use AirPrint.
No dial tone is detected.
This problem might be resolved by tapping
Settings
>
General
Settings
>
Fax Settings
>
Basic Settings
>
Line Type
, and then
selecting
PBX
. If your phone system requires an external access code to
get an outside line, set the access code after selecting
PBX
. Use # (hash)
instead of the actual access code when entering an outside fax number.
This makes connection more secure.
If the error message is still displayed, set the
Dial Tone Detection
settings to disabled. However, disabling this feature may drop the first
digit of a fax number and send the fax to the wrong number.
Failed to receive faxes because the fax data
capacity is full. Touch the Job/Status at the
bottom of the Home Screen for details.
Received faxes may accumulate without being processed due to the
following reasons.
❏
Cannot print because a printer error has occurred.
Clear the printer error. To check the details and solutions to the error,
press the
button and then tap
Printer Status
.
❏
Cannot save in the computer or the memory device.
To check whether or not received faxes have been saved, press the
button and then tap
Job Status
. To save received faxes, turn on
the computer or connect a memory device to the printer.
The combination of the IP address and the
subnet mask is invalid. See your documentation
for more details.
Enter the correct IP address or default gateway. Contact your network
administrator for assistance.
To use cloud services, update the root certificate
from the Epson Web Config utility.
Run Web Config, and then update the root certificate.
Check that the printer driver is installed on the
computer and that the port settings for the
printer are correct.
Make sure the printer port is selected correctly in
Property
>
Port
from
the
Printer
menu as follows.
Select "
USBXXX
" for a USB connection, or "
EpsonNet Print Port
" for a
network connection.
Recovery Mode
Update Firmware
The printer has started in recovery mode because the firmware update
failed. Follow the steps below to try to update the firmware again.
1. Connect the computer and the printer with a USB cable. (During
recovery mode, you cannot update the firmware over a network
connection.)
2. Visit your local Epson website for further instructions.
>
A Message is Displayed on the LCD Screen
262
Содержание WF-C878R Series
