Epson TM-T88VI-iHUB, Справочное руководство

Страница: 65 / 156

65
Chapter 3 Advanced Usage
3
Network Settings
The following explains the procedure for network settings in order to connect the product to your network.
Setup methods
There are three methods for set up.
Method 1: Setup using TM-T88VI Utility for Windows
This method uses the setup utility "TM-T88VI Utility" installed on your computer.
As it does not require any settings in advance to allow set up, you can easily perform set up using a computer
already connected to the network.
Method 2: Setup using EpsonNet Config
This method involves installing the network configuration tool, EpsonNet Config, on your computer for set-
ting.
As it does not require any settings in advance to allow set up, you can easily perform set up using a computer
already connected to the network.
Method 3: Setup using EpsonNet Config (Web version)
This method involves opening the Web application equipped in the printer from a Web browser to perform set-
tings.
Because you specify the printer's IP address to open it, you need to set your computer to the same network seg-
ment as the printer.
With EpsonNet Config (Web version), you can set more items than with EpsonNet Config.
Flow of Setup
Setup using EpsonNet
Config
Printing the status sheet (check settings) (See "Printing a Status Sheet" on page 79 .)
Method 1 Method 2 Method 3
Setup using TM-T88VI Utility for
Windows
Finish Finish Finish
Use EpsonNet Config
(Web version) to perform settings
Change network settings
on setting computer