Epson TM-T88VI-iHUB, Справочное руководство

Страница: 63 / 156

63
Chapter 3 Advanced Usage
3
Print density during multi-tone printing
Selectable from 70% to 130% (5% increment)
Default setting: 100%
Power supply output
Selectable from levels 1 to 3 low power load
Default setting: level 3
Paper width

80mm (default setting)

58mm
Interface switch wait time
Select from 1 to 10 seconds (in intervals of 1 second)
1 second (default setting)
Main interface selection

Auto (interface that receives data first) (default setting)

USB

Ethernet/Wi-Fi

No main connection I/F
Startup display

Enabled

Disabled (default setting)
USB class

Printer class (default setting)

Vendor-defined class

When using this printer with multiple interfaces, make sure the interface that is always
connected to be set as the main connection.

When using multiple interfaces, set the receive buffer capacity to 4 KB.

You cannot use wired LAN and wireless LAN at the same time.
For information about the function, see "Printing Using Multiple Interfaces" on page 30.