
89
• Do not touch the ends of the cleaning sticks to prevent oil from your hands from damaging the print
head.
• Do not use alcohol or water to clean the nozzle surface, caps, or wiper or you may damage your
product.
• Store ink cartridges, cleaning cartridges, ink cleaner, grease, and waste ink out of the reach of
children.
• Wear protective eyewear, gloves, and a mask when performing maintenance tasks.
• Wash your hands after performing maintenance.
• Gargle with water after replacing the waste ink bottle or using the ink cleaner.
Warning:
If ink, waste ink, ink cleaner, or grease contacts your skin, or gets into your eyes or mouth,
immediately do the following:
• Wash your hands after performing maintenance. Gargle your mouth as well after replacing the waste
ink bottle or using the ink cleaner.
• Thoroughly wash the substance from your skin with soapy water. If your skin becomes irritated or
discolored, contact a doctor.
• Immediately rinse the substance from your eyes with water to avoid bloodshot eyes or mild
inflammation. If you experience eye problems, contact a doctor.
• If a substance gets in your mouth, contact a doctor immediately.
• If you swallow a substance, do not induce vomiting and contact a doctor immediately. Inducing
vomiting may cause material to get in your windpipe and cause injury.
Parent topic:
Preparing for Maintenance
Related references
Maintenance Supplies
Cleaning the Platen Heater and Media Edge Plates
Carefully follow the steps here to clean the platen heater and media holding plates to remove ink, paper
particles, and lint.
Warning:
The heaters and media edge plates may be hot; take care not to burn yourself.
Содержание SureColor S40600
