Epson SureColor F2000 Series Скачать руководство пользователя страница 122

Страница: 122 / 175

Transportation Preparation

Do the following before moving or transporting the printer:

• Turn off the printer.

• Remove all cables.

• Remove the platen.

• Close the fixing lever.

• Remove any tools or parts from the tool storage space.

• Locate the waste ink outlet plugs that came with the printer.

Parent topic:

Moving or Transporting the Printer

Moving the Printer

You can move the printer across the room or to a different room on the same floor level as described
here.

Note:

Wear the protective gloves included in the maintenance kit to prevent your hands from being

soiled by waste ink.

Make sure the printer is turned off.

Carefully remove the waste ink tube from the waste ink bottle.

Remove the waste ink bottle.

122

Содержание SureColor F2000 Series
















































































































































































Результаты поиска

Содержание SureColor F2000 Series

Отзывы:

Похожие инструкции для SureColor F2000 Series

Бренды по названию

Популярные бренды

Epson SureColor F2000 Series, Руководство пользователя

Результаты поиска

Содержание SureColor F2000 Series

Отзывы:

Похожие инструкции для SureColor F2000 Series

Бренды по названию

Популярные бренды