Epson Stylus Pro 9860 Скачать руководство пользователя страница 76

Страница: 76 / 101

Error messages related to the maintenance

Error messages

Description

What to do

PAPER SENSOR ERROR
PRESS THE

BUTTON

LOAD THE CORRECT PAPER
REFER TO THE MANUAL

The loaded paper is not
proper for the Print Head
Alignment.

Press the

button to clear the error. Press the

button to release the paper presser, and then load the
paper that matches with the media type selected for the
Print Head Alignment.

See

“Print head alignment” on page 67

CLEANING ERROR
NOT ENOUGH INK OR
SPACE IN MAINT TANK
CONTINUE CLEANING?
YES (RECOMMENDED)
NO

There is not enough ink or
space in the maintenance
tank to perform cleaning.

By clicking

YES

, the message to replace the ink cartridge or

maintenance tank appears. Replace the ink cartridge or
maintenance tank with a new one to continue cleaning.

See

“Replacing Ink Cartridges” on page 56

See

“Replacing the Maintenance Tank” on page 59

INK TOO LOW TO CLEAN
REPLACE INK CARTRIDGE

There is not enough ink to
perform cleaning.

Replace the ink cartridge with a new one.

See

“Replacing Ink Cartridges” on page 56

INK TOO LOW TO CLEAN
THE CARTRIDGE BEING USED CAN
BE INSTALLED AGAIN FOR PRINTING

There is not enough ink to
perform cleaning.

Replace the ink cartridge with a new one.

See

“Replacing Ink Cartridges” on page 56

NO CARTRIDGE
INSTALL INK CARTRIDGE

No ink cartridge is installed
or the ink cartridge may
not fit.

Install an ink cartridge correctly. Do not reinstall the ink
cartridge that caused an error.

See

“Replacing Ink Cartridges” on page 56

INK CARTRIDGE
INK LOW REPLACE INK CARTRIDGE

The ink cartridge is
expended.

Replace the ink cartridge with a new one.

See

“Replacing Ink Cartridges” on page 56

INK LOW

The ink cartridge is nearly
expended.

Replacement of the ink cartridge is nearly needed.

See

“About ink cartridges” on page 56

INK CARTRIDGE ERROR
REPLACE CARTRIDGE

The ink cartridge was
found faulty. There may be
a bad contact or dew
condensation in the
cartridge.

❏

Remove the ink cartridge and reinstall it. If this
message appears after reinstalling the ink cartridge,
replace it with a new one. (Do not reinstall the ink
cartridge that caused an error.)

See

“About ink cartridges” on page 56

See

“Replacing ink cartridges” on page 57

❏

Condensation may occur in the ink cartridge so leave
it at room temperature for at least four hours before
installing the ink cartridge.

See

“Notes for replacing the ink cartridges” on

page 57

NO MAINTENANCE TANK
INSTALL THE LEFT SIDE
MAINTENANCE TANK

The maintenance tank is
not set in the printer.

Install the maintenance tank.

See

“Replacing the Maintenance Tank” on page 59

NO MAINTENANCE TANK
INSTALL THE RIGHT SIDE
MAINTENANCE TANK

NOT ENOUGH EMPTY SPACE
REPLACE THE RIGHT SIDE
MAINTENANCE TANK

The maintenance tank has
not enough empty space
so the cleaning cannot be
performed.

Replace the target maintenance tank with a new one.

See

“Replacing the Maintenance Tank” on page 59

Epson Stylus Pro 9860 User's Guide

Problem Solver

Содержание Stylus Pro 9860






































































































Результаты поиска

Содержание Stylus Pro 9860

Отзывы:

Похожие инструкции для Stylus Pro 9860

Бренды по названию

Популярные бренды

Epson Stylus Pro 9860, Руководство пользователя

Результаты поиска

Содержание Stylus Pro 9860

Отзывы:

Похожие инструкции для Stylus Pro 9860

Бренды по названию

Популярные бренды